|art clay in a syringe||or making jewellery at kitiki.co.uk or electric kilns at electrickilns.co.uk|
Art Clay Silver Clay is a clay-like composite material made of fine silver powder and water-soluble organic binders. It looks and feels like dull-grey toothpaste, and can be squeezed out to make patterns. During firing, the binders vaporise, the powder sinters, and the soft clay turns into real solid 999 silver: ready to wear, give, or sell.
Art Clay Silver Clay fires at 650°C held for 30 minutes or 800°C held for 5 minutes. The fired metal is solid silver, which can be hallmarked as pure 999 silver. A wide range of other materials can be combined with it before firing.
It has three main uses: to create delicate patterns, either on a clay piece or on a mould; to build up, or add shape to, an existing clay piece; or to stick two unfired clay pieces together.
Although you can fire Art Clay Silver on a kitchen gas hob, on a camping gaz ring, or with a butane torch, it's more reliable to use a kiln. To learn more about kilns, transfer to Electric Kilns using the link above the menu bar near the top of the page.
|USING THE SYRINGE CLAY|
This water-based clay comes in a small plastic syringe that you can use with one hand. The tips can be cut to your own shape. As you apply the clay, you can use a little water to smooth the surface and optimise the adhesion.
Whilst working, don't let any clay dry on your tools: keep your brush tips in water and dab them on lint-free cloth just before use. Save scraps of clay in a small airtight container.
Dry silver clay for 24 hours in a warm place, or in a kiln programmed from cool to 150°C then held for 10 minutes: although, with care, you can dry it with a hair drier or a hot air gun, on a central heating radiator, or in a kitchen oven.
After drying, silver clay looks and feels like dull-white plaster. It's strong enough for you to be able to refine the shape using a knife, a scriber, a file, a drill, and abrasives. However, at this stage, thin pieces are brittle, so may snap.
Fire silver clay in a kiln programmed from cool to 650°C, then held for 30 minutes: although, with care, you can fire small pieces on a kitchen gas hob, on a camping gaz ring, or with a butane torch. If your piece doesn't include anything that will crack or melt at a higher temperature, it can be fired at 800°C for 5 minutes.
As it's heated, the organic binders vaporise and small amounts of non-toxic carbon dioxide and water vapour are released: so it's safe to use at home.
After firing, the clay still looks dull, but brushing off the powdery coating reveals bright metal. Your piece is now ready to reshape, drill, stain, polish, tumble, or burnish. Remember, it is metal: it doesn't just look like metal.
|ART CLAY UK|
is a Cherry Heaven internet resource. It's a top-tier international distributor for Texas-made Paragon kilns, furnaces, ovens, accessories, and tools, and has been one of their top-selling partners from 2006 to : a pleasing outcome since the UK is only one third the area of Texas and one fortieth the area of the US.
As this is an on-line resource, there isn't a paper catalogue or a price list. However, you can mail or call a technician about kilns, power supplies, public area safety, a special project, business ideas, diagnostics, repairs, or reselling opportunities.
Cherry Heaven was the name of the design studio in Kensington, West London, then the shop in Corfe Castle, Dorset. It's now an on-line distributor and retailer in West Holme, Dorset, South-West England. Although there's no longer a real shop, Cherry Heaven is still the working name.
The surrounding countryside includes green farmland, dramatic heritage cliffs, pretty stone cottages, historic buildings, sandy beaches, protected coves, open heathland, hill-top panoramic views, market towns, and peaceful villages. And lively seaside resorts. To look at some photos, use the dorset link below the menu bar near the top of this page.
Paragon Industries started as a family business in 1948. It's now the world's leading manufacturer of kilns and furnaces, and has built over 440,000 in 4,000 variants. The 6,700 square-metre site, in Mesquite, Texas, USA, has 67 full-time staff.
During manufacture, every kiln is checked at every stage by a technician and signed-off before shipping. They're simply but robustly engineered, and you're buying a comprehensive, versatile, safe, low-cost kiln: a kiln with a future.
Paragon kilns are TUV tested, and CL and CSA approved for the US, and are CE Marked for the EU. Paragon is Greek for Model Of Perfection.
|CLASSES AND COURSES|
The Kitiki Studio provided an Art Clay educational programme, as classes, masterclasses, workshops, and Art Clay Level 1 and Level 2 certification. However, as we're in a rural area, I now recommend teachers that might be nearer, so mail or call.
|DISCOUNTS AND RESELLING|